How to turn on a 3d pen

1 Plug in your 3D pen Make sure to set the temperature according to your choice of plastic 2 Insert your plastic Push the plastic through the back until you feel a little click. You will also see and be able to feel the filament moving as it is retracted from the pen. Power input hole Wire loading hole Indicators Speed controller Temperature Controller Wire feeding Button and Wire unloading button. Select temperature setting that is appropriate for your project. Once you have successfully mounted your pen to. Turn on the 3D pen and wait until it reaches the right temperature.

To begin a 3D sketch you need to start with a solid anchor point.

1 Plug in your 3D pen Make sure to set the temperature according to your choice of plastic 2 Insert your plastic Push the plastic through the back until you feel a little click. You will see the LED light on the front start to flash from Red to Blue and you will hear the motor start to unload the filament. The 3D pen has a power switch not an on-and-off button but a plastic selector for controlling it. This allows you to pen much cleaner lines of plastic. My pen heats up but filament does not extrude. 1012016 Inside Out Other channel. Allow 30 seconds for the pen to warm up. If the display does not turn on try an alternate AC to USB adapter if available. The button is in the middle position when the pen switches off. Try setting the speed control to fast. Usually you must turn on the power by plugging the 3D pen to the power source.